Showing 10–18 of 39 results

D-Ring for Kayaks

65.00EGP inc. Vat

A D-ring for any Galaxy Kayak can be an invaluable part of your setup. These D-Rings are useful as attachment points for thigh straps and backrests for sit on top kayaks. Made from high quality durable plastic and stainless steel and easily attached to your kayak using the screw provided.

The D-ring fits onto various fixture points along the kayaks rim. It’s a simple accessory that is necessary for attaching your kayak seat correctly. They are also useful for securing all manner of objects to your kayak. Whether you are using a safety leash, or want to secure your scupper plugs to the boat, D-rings always come in handy.

The D-ring is attached to the copper fixture moulded into the kayak hull. If you want to add our fish finder support or GPS support mechanism to your kayak, you can simply unscrew any of the D Rings and place the multi function support into the same copper fixtures.

Specifications:
Material: Plastic and stainless steel
Measurement: 5cm x 1cm
Weight: 12g

Fine Thread Kayak Drain Plug

55.00EGP inc. Vat

This fine thread drain plug can be used on all Galaxy Kayaks. Drain plugs are fitted onto our sit on top kayaks to remove any unwanted bilge water after a paddling session. The plug comes with a stopper to facilitate the draining process and to safeguard your plug.

Suitable for all the Galaxy Kayaks sit on top kayaks.

Specifications
Material: High quality durable plastic
Measurement: 6cm x 6cm (widest)
Weight: 12g

Scupper plug for sit on top kayak

100.00EGP inc. Vat

These durable rubber scupper plugs are used to close the drainage points on your sit on top kayak. Our sit on top kayaks come with either large or small scupper plugs (see below). The scupper plugs can either be left in or removed depending on use and water conditions.

To activate your sit on top kayaks draining system, simply remove the scupper plug from areas where there has been a build up of water, start paddling ahead and once the natural suction drains the water in the affected area, replace the scupper plug and continue on your journey.

The scupper plugs are often lost if you are not careful so we recommend ordering a few extra or tying them with light string to your kayak.

Small is suitable for: tandem 2+1 kayak both leisure and fishing models.
Large is suitable for: all individual kayaks: Cruz, Fuego, Blaze and Alboran models.

Specifications:
Material: Durable Rubber
Sizes: small (2.5cm x 5.5cm) and large (3.5cm x 2.5cm)
Weight: small: 16g, large: 22g

Paddle leash for kayak

250.00EGP inc. Vat

This paddle leash for a sit on top kayak comes with a simple clip that attaches straight on to the handle of your paddle. This allows you to free your hands quickly if need be and not worry about loosing your paddle. When that big fish bites you want to be ready and not have to worry about anything else!

The paddle leash allows you to clip on other items you don’t want to lose in the water as well.  However for your fishing rods we recommend using our safety leash with Velcro strap or a safer clip.

Kayak fishing rods and reels should always be secured safely to the boat. Many a fisherman have watched their favourite rod sink to the bottom of the sea, or even worse attached to the end of that dream fish!

This paddle leash is made of durable hardened rubber that is very flexible and can reach up to 1.5m in length. The other side of the leash comes with a fixture that can easily be attached to points on your kayak, such as D rings.

Specifications
Material: Hardened rubber and plastic
Measurement: 43cm x 2cm – 1.5m stretched
Weight: 62g

Safety leash for kayak with compass

400.00EGP inc. Vat

This safety leash for a sit on top kayak comes with a Velcro strap to attach to your paddle or rod so that you don’t need to worry about losing anything whilst on the water. The safety leash comes with a compass near the strap, which helps with navigation.

Kayak fishing rods and reels should always be secured safely to the boat. Many a fisherman have watched their favourite rod sink to the bottom of the sea, or even worse attached to the end of that dream fish!

The leash is made of durable hardened rubber that is very flexible and can reach up to 1.5m in length. The other side of the leash comes with a fixture that can be easily attached to points on your kayak, such as D rings.

Specifications
Material: Hardened rubber and plastic
Measurement: 43cm x 2cm – 1.5m stretched
Weight: 63g

Out of stockOut of stock

Extra Long Two-piece kayak paddle

1,300.00EGP inc. Vat

This extra long two-piece kayak paddle is lightweight and adjustable so that it fits the users preference. This paddle measure 230-245cm and comes with a silver aluminium shaft with a black rubber non-slip coating over the grip area of the paddle.

The rubber grip comes in a slightly oval shape on one side to help fit the mould of your grip. It has black polyethylene blades that are gently curved to increase the friction when pushing through the water.

The shaft of the paddle includes an easy button click system to attach or remove the two parts. The two pieces can be clicked into place in two positions that adjust the angles of the two facing blades. This allows you to have the blades set at the horizontal position or off-set depending on your preferred paddle style.  Lightweight and easy to store, this is the perfect companion to your sit on top kayak.

Specifications:
Material: Aluminium and polyethylene
Measurement: 230cm-245cm x 3cm, paddle blade: 17cm x 45cm
Weight: 93.2g

Out of stockOut of stock

Two-piece kayak paddle

1,100.00EGP inc. Vat

This two-piece kayak paddle is lightweight and adjustable so that it fits the users preference. This paddle comes with a silver aluminium shaft with a black rubber non-slip coating over the grip area of the paddle.

The rubber grip comes in a slightly oval shape on one side to help fit the mould of your grip. It has black polyethylene blades that are gently curved to increase the friction when pushing through the water.

The shaft of the paddle includes an easy button click system to attach or remove the two parts. The two pieces can be clicked into place in two positions that adjust the angles of the two facing blades. This allows you to have the blades set at the horizontal position or off-set depending on your preferred paddle style.  Lightweight and easy to store, this is the perfect companion to your sit on top kayak.

Specifications:
Material: Aluminium and polyethylene
Measurement: 210cm x 3cm, paddle blade: 17cm x 45cm
Weight: 93.2g

Small flush mount rod holder for kayak

350.00EGP inc. Vat

This small flush mount fixed rod holder can be used to hold many sizes of rods and comes standard in  Galaxy Blaze sit on top fishing kayaks.  The rod holder is made from durable plastic and comes with three screw mounts to fix it to your sit on top kayak and a foam sealing ring to stop water filtering through the screw holes and edges. It also comes with a rubber lid that can be closed to reduce any unwanted water from entering it when the rod holder is not being used.

The flush mount rod holders come facing outwards at an angle of 50º. This allows the rods to sit in comfortably in the road holders and not get in your way. Whether you are bottom fishing, fishing with a float or doing some trolling, the angle of the rods should be ideal to suit your needs.

Specifications:
Material: Plastic and rubber
Measurement: Opening measures 3.8cm x 4cm, tube length 17.5cm,lid of rod holder 9.6cm x 7.9cm,
distance of horizontal screws 5cm (centre to centre), distance to vertical screw (centre to centre)
6.5cm

Models: Galaxy Blaze fishing kayaks

Large flush mount rod holder for kayak

350.00EGP inc. Vat

This large flush mount fixed rod holder can be used to hold many sizes of rods and comes standard in Galaxy  Cruz Tandem  Tandem Vistafishing kayak and Alborán. The rod holder is made from durable plastic and comes with three screw mounts to fix it to your sit on top kayak and a foam sealing ring to stop water filtering through the screw holes and edges. It also comes with a rubber lid that can be closed to reduce any unwanted water from entering it when the rod holder is not being used.

The flush mount rod holders come facing outwards at an angle of 50º. This allows the rods to sit in comfortably in the road holders and not get in your way. Whether you are bottom fishing, fishing with a float or doing some trolling, the angle of the rods should be ideal to suit your needs.

Specifications:
Material: Plastic and rubber

Measurement: Opening measures 4cm x 4.5cm, tube length 19.5cm,lid of rod holder 10cm x 8.4cm, distance of horizontal screws 5.7cm (centre to centre), distance to vertical screw (centre to centre) 7cm.

Models: Tandem Solo/Vista & Alborán